Client - Royal Flex-Lox Pipe Ltd.- pressure tester (tests the product for high inner water pressure) - beller (forms the 'bell' on one end of the pipe) - cut to length controllers - Thick-wall controllers (controls the extruder to position the thicker wall section so that when the bell is formed in the beller, the wall thickness remains within the spec. Also tracks the position so that when a sample is required, only short piece of product is cut - reduces amount of waste or recycling) - Grinder / pulverizing system (three stage grinder system for recycling of waste product. The system accepts PVC pressure pipes as whole and final product is stored in silos in pulverized form, ready for addition to the extruder mix.) - Mixers control systems (customized controls for hot blending. Final product used for extruders usage. Interfaced and controlled by remote HMI from main control room) - Vacuum conveying system (supplies raw blended materials to the extruder lines using vacuum blowers. This extremely intelligent system is remotely controlled from main control room via HMI running Wonderware application) - Blending system (installed a suffisticated, very intelligent and fully automatic blending system, controlled remotely from main control room via HMI running Flash application). - Troubleshooting services for all other types of plant machinery. |